OrionOne Bio Talk to us

Fully autonomous qPCR.
A result within 60 minutes.

Load a small sample. Read the qPCR result inside the hour. Starting with environmental samples.

aThe instrument
The OrionOne instrument: a white benchtop enclosure with a front window.
  • Runsfully autonomous qPCR
  • Needsa small sample volume
  • Returnsa result within 60 min
bWhat the instrument reads during a run (sample data)
Illustrative amplification plot, four detection channels over a 60 minute run Sample data. Channels 1, 2 and 3 rise above the detection threshold at about 20, 26, 33 minutes. Channel 4 stays flat, meaning nothing was detected in it. A result is reported at minute 52, inside the 60 minute bound. 0 10 20 30 40 50 60 0 0.25 0.5 0.75 1 Run time, minutes Fluorescence (relative) detection threshold Ch 1 Ch 2 Ch 3 Ch 4 result reported 60 Illustrative amplification plot, four detection channels over a 60 minute run Sample data. Channels 1, 2 and 3 rise above the detection threshold at about 20, 26, 33 minutes. Channel 4 stays flat, meaning nothing was detected in it. A result is reported at minute 52, inside the 60 minute bound. 0 20 40 60 0 0.5 1 Run time, minutes Fluorescence (relative) threshold result
Fig. 1. How qPCR reports a result (illustrative sample data). A curve that climbs past the threshold means its target was found; a flat channel means it was not. Each colour on this page also marks one question.

What it is, and how a run goes

qPCR is the DNA method labs already trust. OrionOne runs the whole test itself, so whoever collected the sample has the answer within the hour.

What we can state today.
MethodqPCR
OperationFully autonomous run
Time to resultWithin 60 min of the sample
Sample volumeSmall; exact figure on request
First samplesEnvironmental
Targets, sensitivity, priceNot yet published
  1. 0 minLoad the sample

    The only hands-on step.

  2. 18 minThe run proceeds alone

    No one at the bench.

  3. 38 minChannels cross threshold

    Found targets rise; others stay flat.

  4. 52 minResult reported

    Inside the hour.

Fig. 2. One run, four moments. Illustrative sample data.

How long you wait for an answer today

Culture tests incubate 18 to 24 hours before anyone can read them. The alternatives leave the building or need a trained operator.

Culture testenzyme-substrate incubation
18–24 h incubation
Send-out labshipped to a contract lab
courier, then the lab's queue
Bench-top qPCRin-house, run by trained staff
when a trained operator is free
OrionOneautonomous qPCR
within 60 min
0 h6121824 h
Hours from sample to readable result
Fig. 3. Hours from sample to result. Send-out and bench-top times vary, so they are not drawn to a number.

Who it is for, and the decisions it speeds up

A result inside the hour means acting on the same shift, not the next morning.

Municipal water utilities

Lab directors and plant operations managers. Procurement signs.

  • Flush, re-sample or escalate, while the crew is still on site
  • Confirm a treatment change worked, the same shift it was made

Food and beverage processors

QA lab leads and plant operations managers. Procurement signs.

  • Use process water now, or hold the next run
  • Return a cleaned line or surface to production, or clean again

Hatched: a next-day culture wait. Solid: an answer inside the hour. Not to scale.

When teams start looking

  • A contamination event
  • A compliance deadline
  • Lab cost pressure
  • An equipment refresh

Other environmental uses we hear aboutWastewater surveillanceProcess water and surfacesAgriculture and aquacultureIndustrial process water

How to start: a pilot beside the method you trust

Labs switch methods on evidence. Run OrionOne beside your current method, on the same samples.

  1. 1
    Your samples and your current method

    What you test today, and how.

  2. 2
    What a side-by-side would compare

    Which samples and results count.

  3. 3
    Running both, in parallel

    OrionOne beside your current method.

  4. 4
    Reviewing it with the people who sign

    Lab, operations and procurement decide together.

Questions labs ask first

Is OrionOne approved for regulatory compliance testing?

We make no regulatory claims. Tell us your regulator and method, and we will talk plainly about fit.

How much sample does it need?

A small volume. We share the exact figure for your sample type.

Which organisms or targets can it test for?

No target list is published yet. Ask about the targets you test for.

What does it cost?

Pricing is not published yet. Write to us and we will talk it through.